When using D2D can i turn off OEM Remote Funct?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143519
Printed Date: May 07, 2025 at 2:33 PM

Topic: When using D2D can i turn off OEM Remote Funct?

Posted By: shadowinfector
Subject: When using D2D can i turn off OEM Remote Funct?
Date Posted: August 31, 2017 at 9:55 PM

Aftermarket Alarm Ctrl from OEM remotes.

I want to install using D2D either directed, idatalink, or fortin, but all the bypass modules have the OEM Remote control to control aftermarket alarm. In this case i dont want the oem remote to be able to arm/disarm the aaftermarket alarm. Is that possible to turn off or is my only option is to do W2W with the dball2 or db3? Maybe im able to flash older firmware?

Any ideas? thanks

Replies:

Posted By: howie ll
Date Posted: September 01, 2017 at 6:04 AM

You can turn it off when you flash, gives you an options list underneath. I always do that.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: shadowinfector
Date Posted: September 01, 2017 at 6:31 AM

Ah ha....never realized that lol... Thanks

Print Page | Close Window