2016 Mazda CX-5 Viper 5906v
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143554
Printed Date: April 25, 2024 at 11:45 PM
Topic: 2016 Mazda CX-5 Viper 5906v
Posted By: lightningwind
Subject: 2016 Mazda CX-5 Viper 5906v
Date Posted: September 19, 2017 at 11:36 PM
hi all this is my first post on the forum, since i heard lots good thing about this site, so i came to search for help. i have a 2016 mazda cx-5 GT w/tech package, now i wanna install the viper 5906v on the car, but i can't find any wire diagram anywhere, not even on this site, so i wanna see if anybody can provide that, and anybody here have installed the viper 5906v on their car? it is a good alarm/remote start like they said it is? thank you so much for all the help
Replies:
Posted By: howie ll
Date Posted: September 20, 2017 at 12:50 PM
https://directechs.blob.core.windows.net/ddt/403-MA3-2.20-ORI_2016-CX-5-(Smart-Key)_IG_EN_20170619.pdf
You'll need a DB3 flashed to your vehicle.
Having said that, if this is your first time I strongly recommend you taking it to a pro.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: lightningwind
Date Posted: September 20, 2017 at 10:01 PM
thank you so much for your help, but i saw on the manual it says there is no vehicle takeover, but that's the reason i wanna go aftermarket instead of the mazda factory remote starter, don't wanna start the car again after it's already started. but thank you for your help again.
Posted By: abethebue
Date Posted: September 20, 2017 at 11:28 PM
Bypass the door trigger when you remote star so the car doesn't shut off when you open the door
-------------
abethebue
Posted By: beegbie
Date Posted: September 21, 2017 at 6:35 PM
The ads-alca firmware has safe take over. Check it out at www.idatalink.com.
|