2013 Camry Trunk pop

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143606
Printed Date: May 02, 2024 at 11:05 PM

Topic: 2013 Camry Trunk pop

Posted By: aferoz
Subject: 2013 Camry Trunk pop
Date Posted: October 08, 2017 at 4:59 PM

I am installing an aftermarket keyless entry into a 2013 Toyota camry. I have every thing wire up and working except the remote trunk pop. I am not sure how the trunk actuator is wired and how does it work? how do I hook up the wire from the keyless system to the car. the keyless system had a + 500mv truck / aux wire.

Thanks in advance.

Replies:

Posted By: kreg357
Date Posted: October 08, 2017 at 5:50 PM

Here is the Camry Trunk Release wire info :
Trunk Release RED (5 WIRE) @ DASH FUSE BOX WHITE 36 PIN CONN, PIN 10

Here is the relay wiring. You need to locate and verify the Camry's Red trunk release
wire and then cut the wire and add in this relay circuit.

posted_image

-------------
Soldering is fun!

Posted By: aferoz
Date Posted: October 08, 2017 at 9:33 PM

Thank you Kreg357

Print Page | Close Window