Print Page | Close Window

2016 GMC Savana DBALL2

Printed From:
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
Printed Date: August 05, 2021 at 11:43 PM

Topic: 2016 GMC Savana DBALL2

Posted By: jameselantra
Subject: 2016 GMC Savana DBALL2
Date Posted: October 13, 2017 at 8:19 PM


I Have a 2016 GMC Savana that has an avital remote start and a dball2 bypass module.

the dball2 is using firmware 402.GM11 v1.07

everything seems ok however i see a new 1.08 firmware that says fixed rpm status.

what does that mean?

im currently running D2D install so my remote starter is getting tach via the dball2. Is that the rpm status it is reffering to? does this fix effect my installation?

please advise.




Posted By: jameselantra
Date Posted: October 15, 2017 at 5:30 PM
anyone know what the fix is? im curious.

Posted By: beegbie
Date Posted: October 15, 2017 at 7:59 PM
Firmwares get updated all of the time. If the remote start is working there's no reason to update it. It could actually cause issues. What scenario will the rpm status become an issue? I doubt anyone in here knows.

Print Page | Close Window