2010 Armada Seat and SW Heater relay
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143640
Printed Date: April 25, 2024 at 5:40 PM
Topic: 2010 Armada Seat and SW Heater relay
Posted By: d16apwr
Subject: 2010 Armada Seat and SW Heater relay
Date Posted: October 18, 2017 at 8:49 PM
All,
I'm installing a Clifford 4606x into a 2010 Nissan Armada Platinum. I wanted to use the second status out (defogger) to turn on the heated seats to high, as well as turn on the steering wheel heater. This output goes to ground normally when the temperature is below 55 deg. F in the cabin. I've included my planned relay connections to accomplish this. Just looking for some input on if this is correct or not. All connections to the alarm (-) output will be diode isolated. Also, both the seat heater switches, as well as the steering wheel heater, are all latched switches.
Thanks!
I'm installing a Clifford 4606x into a 2010 Nissan Armada Platinum. I wanted to use the second status out (defogger) to turn on the heated seats to high, as well as turn on the steering wheel heater. This output goes to ground normally when the temperature is below 55 deg. F in the cabin. I've included my planned relay connections to accomplish this. Just looking for some input on if this is correct or not. All connections to the alarm (-) output will be diode isolated. Also, both the seat heater switches, as well as the steering wheel heater, are all latched switches.
Thanks!
Replies:
Posted By: d16apwr
Date Posted: November 02, 2017 at 1:08 PM