Print Page | Close Window

2016 Jeep Wrangler 3x lock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143681
Printed Date: April 19, 2024 at 4:16 PM


Topic: 2016 Jeep Wrangler 3x lock

Posted By: ziggyb222
Subject: 2016 Jeep Wrangler 3x lock
Date Posted: October 27, 2017 at 6:41 PM

Installing a stand alone remote start in my daughters 2016 Jeep JK. The shroud around the column will not come off. There is a lip the goes under the steering wheel. I just did a 2015 two weeks ago for a customer and the came right off. Is there a way to get the cover off without removing the steering wheel?? Thanks!!!



Replies:

Posted By: loganemakf
Date Posted: October 28, 2017 at 8:49 AM
You’ve probably already tried this but... Turn the wheel all the way left then all the way right and look for screws behind the steering wheel (like some toyotas)?




Posted By: beegbie
Date Posted: October 28, 2017 at 5:49 PM
If you want to take the shroud off, the wheel needs to come off on the 2016. It's not difficult. Or you can just make your connections in the harness coming down the steering column.




Posted By: ziggyb222
Date Posted: October 30, 2017 at 6:20 PM
Thank You!!!




Posted By: shafferny
Date Posted: November 05, 2017 at 2:50 PM
Yep. The shroud changed from the 15's to 16's for no apparent reason. My wife and I own both a '15 and a '16 Wrangler. I had to pull the air bag and steering wheel to install the T-harness on her Jeep(the '16).




Posted By: ziggyb222
Date Posted: November 05, 2017 at 5:59 PM
Did the wheel pop right off or were you able to pry the shroud off through the steering wheel???




Posted By: shafferny
Date Posted: November 05, 2017 at 6:35 PM
I had to use a puller.I don't think you could remove it without one. It was on there pretty good.




Posted By: ziggyb222
Date Posted: November 06, 2017 at 5:01 PM
Okay!!!!! Thank you...





Print Page | Close Window