no heat on ford fusion
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143738
Printed Date: May 05, 2024 at 1:31 AM
Topic: no heat on ford fusion
Posted By: bogucki
Subject: no heat on ford fusion
Date Posted: November 07, 2017 at 9:22 AM
hey
i have installed a remote starter (viper 4105v) in a 2006 ford fusion, the remote starter works great but this car has automatic climate control and when the car started with the remote starter the climate control unit won't turn on unless you press the on button while its running. anyone knows what i should do to try to fix this issue cause my customer always has to go to the car in the morning to turn the heat on manually. thanks, i am a pro installer and i have done many fusions but with the manual heater controls and had zero issues
-------------
BOGUCKIALEX
Replies:
Posted By: thenzero
Date Posted: November 07, 2017 at 10:00 AM
I don't know anything about it, but googling turned up this (www.fordfusion.net in case the link gets borked):
heat on ford fusion
Posted By: chev104275
Date Posted: November 07, 2017 at 10:05 AM
I haven't seen one in a while but I believe there is a TSB from Ford to have the EATC head replaced for that issue.
Check out TSB 09-20-1 it explains your exact problem
-------------
If i Can't Install it I Don't need it Joe
Posted By: bogucki
Date Posted: November 07, 2017 at 3:32 PM
yup that seams to be it, wow, wish i had known that before, as the remote starter is kinda useless with out the heater working. its a $600+ heater module wow. not a happy customer :( never doing that car again if it has automatic digital climate control digital climate control. thanks for the TSB info
-------------
BOGUCKIALEX
|