Directed DB3 Firmware
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143773
Printed Date: May 03, 2024 at 12:55 PM
Topic: Directed DB3 Firmware
Posted By: friday24
Subject: Directed DB3 Firmware
Date Posted: November 14, 2017 at 4:17 PM
I recently purchased a DB3 locally and an XKLoader2 off the internet and now need to flash the firmware. Apparently this can no longer be done without being registered with Directechs.com, and you can only register if you are an authorized dealer or installer. The shop I bought it from told me I could do it myself or they could charge me $75 on top of the $99.95 they sold me the unit for which seems a little high, so I chose to do it myself and have now found out through Directed that I cannot. Does anyone know if the firmware can just be downloaded somewhere, or any way I can still flash this myaself? I have a 2006 Silverado SS with a Viper 5906v installed. Any help would be awesome, thanks.
Gerik
Replies:
Posted By: kreg357
Date Posted: November 14, 2017 at 7:43 PM
Any Best Buy's with an install bay near by? Bring a box of doughnuts and ask nicely....
-------------
Soldering is fun!
Posted By: howie ll
Date Posted: November 16, 2017 at 6:34 AM
A rip off. The UK distributor, $75 wholesale will flash it and print out the install guide, all in the price if you ask nicely.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: friday24
Date Posted: November 29, 2017 at 11:42 PM
So I was able to get the firmware flashed, 2 issues I have now are when I remote start the factory alarm goes off so I have to unlock the truck before or after it starts. Second isssue is when I take over after a remote start my gas pedal doesn’t work and I have to shut the truck off and restart with the key. Anyone had either of these issues?
Posted By: howie ll
Date Posted: November 30, 2017 at 1:41 AM
Viper programming menu, Menu 3 Feature 15 option 2 Safe Start.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: rocke
Date Posted: December 29, 2018 at 7:48 AM
Where/ how did you end up getting flashed?
Posted By: friday24
Date Posted: December 29, 2018 at 1:25 PM
Yeah I tried the safe start option and it didn’t make a difference. I had the shop that I bought it from flash it.
Posted By: lurch228
Date Posted: January 06, 2019 at 3:58 AM
With the DB3 and some newer vehicles the flashing process is a 2 step process. 1st flash is prior to installing in the vehicle and second flash is to finalize after everything is hooked up. Both which now require a account to flash.
Posted By: ashrf zenh
Date Posted: May 03, 2020 at 6:34 PM
I have the same problem. I bought another car and bought CLIFFORD 5706X and I need to flash to the new vehicle in DB3 .Even if I need to pay a reasonable amount
PLEAS HELP thannks
|