Print Page | Close Window

2007 Acura MDX-Viper Alarm-Battery Keeps Dying

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143802
Printed Date: May 02, 2024 at 8:33 AM


Topic: 2007 Acura MDX-Viper Alarm-Battery Keeps Dying

Posted By: anoble1
Subject: 2007 Acura MDX-Viper Alarm-Battery Keeps Dying
Date Posted: November 22, 2017 at 11:16 AM

I have an 07 MDX. I keep having the problem of my battery dying (clicking very fast) when I give it a jump start from my other car and it is fine. Battery Test Fine when I took to interstate. First question he asked is if I had an Aftermarket alarm?
I got this Viper Remote start installed 2 years ago almost. Come to think after that is when my problems started. Out of the blue it will be dead, lights will be very low when it is. I even replaced the alternator last year.

How do I test or find shorts or bad grounds on the Viper Alarm?



Replies:

Posted By: howie ll
Date Posted: November 22, 2017 at 5:06 PM
Is there a DB-ALL or similar module in there, the alarm draw is zilch.
The only other possibility is an accessory such as a relay being constantly engaged such as a starter cut.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: beegbie
Date Posted: November 23, 2017 at 6:27 AM
The bluetooth modules in those years mdx models are a very common problem that will kill a battery overnight. Do a google search. Remote starts/alarms get blamed for battery draw issues often but it's very rare that it's the issue.




Posted By: anoble1
Date Posted: November 29, 2017 at 9:40 AM
Bluetooth still works, but I unplugged it and the AMPS went down after I did that. Simple to do. I will see if that fixes it..
Thanks,





Print Page | Close Window