Toyota oem chirp for arm/disarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143830
Printed Date: May 07, 2024 at 2:46 AM
Topic: Toyota oem chirp for arm/disarm
Posted By: jonb2
Subject: Toyota oem chirp for arm/disarm
Date Posted: November 30, 2017 at 1:07 PM
Hi all--found this question unanswered on an earlier post. On Toyota, Lexus, etc... w/ factory keyless entry soft chirp, can this be utilized to chirp when you arm/disarm with the alarm remote rather than using the alarm siren?
I would like to keep the soft chirp that the OEM vehicles have for when you lock/unlock but at the same time still retain the Viper siren when the alarm goes off.
thanks for any thoughts if this is possible!
Replies:
Posted By: bat9905
Date Posted: December 21, 2017 at 10:39 PM
What model vehicle and year? Do you know what bypass module is used?
-------------
bat9905
Posted By: jonb2
Date Posted: December 22, 2017 at 10:42 AM
Vehicle is a 2007 Toyota 4runner. We used DEI XK05 bypass. thanks.
Posted By: bat9905
Date Posted: December 22, 2017 at 4:08 PM
I know with newer Toyota vehicles you can retain factory beep. Idatalink doesn't show it as being offered so dei is probably the same. Looks like all that's is required is transponder bypass so data mode isn't even an option. Usually when this can be done it also allows user to arm and disarm aftermarket alarm with factory remotes.
-------------
bat9905
|