avital 5105l
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143846
Printed Date: May 04, 2024 at 10:28 AM
Topic: avital 5105l
Posted By: fastfrs1
Subject: avital 5105l
Date Posted: December 02, 2017 at 6:25 PM
i have a avital 5105l and trying to figure out why when the alarm goes off and i unlock the truck and turn the key on it doesnt reset the alarm can someone give me any info maby i missed hooking up a wire
Replies:
Posted By: howie ll
Date Posted: December 02, 2017 at 7:04 PM
Do you think you could tell us make model and year, then what you've wired to where orthewrwise no one is going to answer you because where does one start?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: fastfrs1
Date Posted: December 02, 2017 at 7:25 PM
its a 1994 chevy c 1500. so far all i have hooked up is door locks, siren, and park lights.
Posted By: howie ll
Date Posted: December 02, 2017 at 7:28 PM
Try hooking up ignition and if this a remote start program safe start, also look in the vehicle wiring in case your vehicle is there.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: fastfrs1
Date Posted: December 03, 2017 at 12:37 AM
ok will do that will i need relays or no?
Posted By: howie ll
Date Posted: December 03, 2017 at 4:58 AM
The wire on your ignition switch that goes to 12V+ on IGN (panel lights on) and stays live during cranking, connect to the PINK heavy gauge wire from the 5105.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: December 03, 2017 at 4:59 AM
You really should wire up the heavy gauge wires etc. etc. before asking these questions also when you join, solder.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: fastfrs1
Date Posted: December 04, 2017 at 6:36 PM
will i need relays to do so?
|