RAV4 2014 H key remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143849
Printed Date: May 08, 2025 at 9:16 PM

Topic: RAV4 2014 H key remote start

Posted By: erics2000
Subject: RAV4 2014 H key remote start
Date Posted: December 03, 2017 at 1:13 AM

I am looking at installing the ads-alca idatalink bypass with a compustar or Directed remote start module and wondering where I can get it flashed to my vehicle b4 installation? I only need RS and not security alarm too. Thanks in advance!

Replies:

Posted By: kreg357
Date Posted: December 03, 2017 at 5:38 AM

There are sellers on EBay that will flash the ADS AL-CA ( or FLCAN ) to your requested vehicle / firmware
prior to shipment. I believe that a company called Sonic Electonix and possibly Crutchfield will provide
this service. Your install does not require the KLON process so you should be all set once it is flashed.
I see that you are in Canada, so I'm not positive if these companies will work for you.

-------------
Soldering is fun!

Posted By: erics2000
Date Posted: December 04, 2017 at 7:53 PM

Got it. Thanks a lot! the mentioned sellers do not flash it, but a seller "turacell" does for $5! Just wondering posted_image

if it will work with my rav 2014. I would rather go with the blade series due to the compact install,(with cs4102s) but dont know the difference between blade and ads-alca features. Also this seller does not sell blade-al, so I'm stuck with ads-al I guess, and most importantly I dont know if cs4102 HAS a slot for blade-al!!
posted_image

Posted By: loganemakf
Date Posted: December 04, 2017 at 9:01 PM

The CS4102S kit comes with a CM800 control module which does not have a Blade slot.

However, the CS4900S kit comes with a CM900 that is Blade compatible and has similar remotes (same range, different looking) and might actually be cheaper, depending on shipping.

Posted By: erics2000
Date Posted: December 05, 2017 at 8:43 PM

Thanks for that! appreciate your time. will look into it.

Print Page | Close Window