2007 Nissan Altima, Avital 4103, dball2

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143968
Printed Date: May 05, 2024 at 2:03 PM

Topic: 2007 Nissan Altima, Avital 4103, dball2

Posted By: ricardoboston
Subject: 2007 Nissan Altima, Avital 4103, dball2
Date Posted: December 31, 2017 at 9:07 AM

hi there HAPPY NEW YEAR for you all , well I will start this post with one kind of problem that I have ever seen before ,I did an install on 2007 Nissan Altima hybrid have used avital 4103 and dball2 everything works just fine only problem I have its when the remote start its running the radio and the console flash on and off for the entire remote start run time ,but if you turn off the remote start and turn on the car normally the problem will gone and everything comes to normal I really appreciate. some help on this problem please thanks posted_image

Replies:

Posted By: geepherder
Date Posted: December 31, 2017 at 1:52 PM

If you turn your key on without killing the remote start does your radio/console work properly?

It sounds like you have another wire to connect. Bulldog lists two ignition wires (one positive, one negative) and two accessory wires (both positive). https://diagrams.marktoonen.nl/printlist.aspx?MakeID=5&ModelID=19916

Are these all connected?

-------------
My ex once told me I have a perfect face for radio.

Posted By: ricardoboston
Date Posted: December 31, 2017 at 6:47 PM

hi geepherder this car its a push to start not sure if it still need thoses wires I try to upload the diagram but I can't ,if you please go to directechs you can see my install dball2 firmware NISS3HT type 1 thank you a lot for try to help me and happy new year for you and your family

Posted By: geepherder
Date Posted: January 01, 2018 at 4:39 AM

What you can do is test the wiring after you start with the smart key vs remote start. Use the bulldog wiring as a reference. If you notice one wire tests different during remote start than it does with the smart key, you might try hardwiring that output from the remote start.

-------------
My ex once told me I have a perfect face for radio.

Posted By: ricardoboston
Date Posted: January 01, 2018 at 6:22 AM

I will try it soon as can and I will post the results thanks for your time very appreciated,HAPPY NEW YEAR

Posted By: ricardoboston
Date Posted: January 01, 2018 at 4:39 PM

hello my friend I have worked back on the car and no way to find out the problem the only thing is the brain of the avital 4105 clicks and clicks and the radio and the console keep flashing ,maybe its a fool question but a hook up the positive parking lights and the dball says it will do it D2D but on my first try it won't work so I hook up the positive parking lights ?

Posted By: geepherder
Date Posted: January 01, 2018 at 4:58 PM

I'm not sure what "there's no way to find out the problem" means. Did you test the wiring as listed? What were your results?

I can't offer much help with D2D, I've always hardwired. Maybe try to reset the module, and if that doesn't work reflash.

-------------
My ex once told me I have a perfect face for radio.

Posted By: ricardoboston
Date Posted: January 02, 2018 at 5:36 AM

I meant the problem of this car its kind difficult but I think I will hardwire and see if works better thanks I let you know soon I got back to this car