07-13 Silverado/Sierra Correct Window Module
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143994
Printed Date: May 03, 2024 at 5:53 PM
Topic: 07-13 Silverado/Sierra Correct Window Module
Posted By: xxrzdxx
Subject: 07-13 Silverado/Sierra Correct Window Module
Date Posted: January 05, 2018 at 9:15 PM
I was wondering if I could get confirmation on the correct directed window module to use on this vehicle, mainly for rolling windows up when armed. I've seen various posts but no definitive answer on which module to use 529T, 530T or 535T? I've installed a 530T on my car so I'm familiar with the functionality. Hoping to get input from someone who has successfully installed one on this particular vehicle.
Replies:
Posted By: xxrzdxx
Date Posted: March 03, 2018 at 8:27 PM
Still looking for input. According to a directechs print out for my vehicle, the windows are type A and the 529t model has to be used. So I did this and wired right to the window motor in the door, but no movement on the window whatsoever. The unit clicks when armed, and the switch still functions as normal, but the 529t does nothing to control the windows on its own. I only want the front 2 windows to roll up when armed.
Has anyone hooked a window module up to this vehicle successfully? And can offer any suggestions?
Posted By: xxrzdxx
Date Posted: March 11, 2018 at 1:58 PM
Tried to use a 530t automation works fine, but windows can no longer be controlled at the switch when connected.
Posted By: tdbaker021
Date Posted: March 11, 2018 at 4:17 PM
I'm using a 530T on my 2000 and 2006 Silverado's and they work fine.
Posted By: tdbaker021
Date Posted: March 11, 2018 at 4:21 PM
Posted By: xxrzdxx
Date Posted: March 11, 2018 at 5:25 PM
I have a different body style, I can't seem to find anyone who can verify success with the 07-13 body style.
Posted By: tdbaker021
Date Posted: March 11, 2018 at 9:12 PM
How did you wire the 530 to your window switch? You should be going straight from the switch and not the motor wires in the door..
Posted By: xxrzdxx
Date Posted: March 12, 2018 at 5:24 PM
Messed around with it some more tonight and got the 529T to work. Contrary to what I believe directechs indicates, it must be wired as type 'C' with two relays. One 529T does not have the ability to operate both front windows in both directions like the 530T, but that is okay with me as I only wanted the windows to roll up when armed.
Posted By: tdbaker021
Date Posted: March 13, 2018 at 5:24 PM
The 530T should work if wired correctly. You should not need a relay for the 530.. You should wire it between the motor and the switch. If you want the passenger side to have one touch you would need to wire the 530 to the passenger door.
https://www.idmsvcs.com/2vmod/windowmodule/installmanuals/dei530tocr.pdf
|