2016 Accord, Viper 5701, DB3

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144006
Printed Date: July 15, 2025 at 11:19 PM

Topic: 2016 Accord, Viper 5701, DB3

Posted By: jgeorgeunc
Subject: 2016 Accord, Viper 5701, DB3
Date Posted: January 08, 2018 at 9:16 AM

I am hoping someone can answer this question for me.

Install on 2016 Accord with Key / Automatic

I installed a Viper 5701 with a DB3. I have all of the alarm functions working fine. I also have the remote start working. The issue is that the RS will start and run normal for about 2-4 Min and then it will shut off and then try to start again. But on the second try it will not fully start and just continue to crank the starter. Any idea's?

Replies:

Posted By: geepherder
Date Posted: January 08, 2018 at 10:22 AM

Have you tried relearning the tach after the engine is warm?

-------------
My ex once told me I have a perfect face for radio.

Print Page | Close Window