pkall lincoln navigator will not stay programmed
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144013
Printed Date: May 01, 2024 at 10:36 PM
Topic: pkall lincoln navigator will not stay programmed
Posted By: racinwarrior2
Subject: pkall lincoln navigator will not stay programmed
Date Posted: January 10, 2018 at 7:24 AM
I am having an issue with a PKALL on a 2012 Lincoln Navigator in w2w configuration
I have verified correct connection of TX/RX wires
+12v and GND wires are connected correctly
Pink ignition wire is connected
GWR wire is connected to remote start
I am able to go through the programming procedure. Hold the button on the PKALL, plug in both connectors, insert 1st key for 3 seconds, insert 2nd key for 3 seconds, then remote start. The vehicle will start and the PKALL will flash the LED 10 times verifying it has been programmed. I shut down the vehicle, try to remote start again and get a flashing theft light and a no start. Vehicle displays "Key not programmed" on display.
I have tried erasing all of the keys stored in the vehicle using Ford IDS. Same situation, module seems to program then doesn't work a 2nd time
|