Viper 4806V, DBALL DB3, 2009 Mazdaspeed3
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144030
Printed Date: May 16, 2025 at 11:52 AM
Topic: Viper 4806V, DBALL DB3, 2009 Mazdaspeed3
Posted By: sebi-97
Subject: Viper 4806V, DBALL DB3, 2009 Mazdaspeed3
Date Posted: January 14, 2018 at 9:38 AM
I am installing a Viper 4806V combined with a DBALL DB3 on a 2009 Mazdaspeed3. (Same as a 2009 Mazda 3)
I can not for the life of me get the door lock/unlock working
The DB3 manual says to:
Connect (MUX) Lock Output from DB3 to: driver kick or passenger dash fuse box, brown 32 pin plug (J06), pin T. (I choose to connect to kick panel) Now, for the color it says: green/red to black/blue... So which is it? Green/red or black/blue. I've tried both with no success
Any ideas?
Here is my link with current soldered in-car connections:
Pin Out
I can not for the life of me get the door lock/unlock working
The DB3 manual says to:
Connect (MUX) Lock Output from DB3 to: driver kick or passenger dash fuse box, brown 32 pin plug (J06), pin T. (I choose to connect to kick panel) Now, for the color it says: green/red to black/blue... So which is it? Green/red or black/blue. I've tried both with no success
Any ideas?
Here is my link with current soldered in-car connections:
Pin Out