Print Page | Close Window

2011 Toyota Corolla Remote start issue

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144039
Printed Date: May 03, 2024 at 9:19 PM


Topic: 2011 Toyota Corolla Remote start issue

Posted By: sternamagraph
Subject: 2011 Toyota Corolla Remote start issue
Date Posted: January 16, 2018 at 7:22 AM

Hello,
I'm going to explain the issue first, then list parts and other stuff

Off the top, the issue I'm having is that the bypass programs and controls the doorlocks, when remote started, it starts for 2 seconds then shuts down.
if I unplug the bypass and hold the key to the ignition, it remote starts and stays running.

Parts:
Toyota Corolla 1.8 (jap build) G 80bit key (not PTS)
R/S - Excalibur 370
Bypass - OL-MDB-ALL / Flashed to OL-AL(MDB)-TL4-EN

In my experience with Toyota vehicles, if the key code is not present at start, it will crank constantly with no start. in my situation, it cranks with start, then shuts down.

Could the car see the key code and not keysense and shut the car down? the install manual for the bypass doesn't say to hook up keysense.


Any info on what it could be would be great.
posted_imageposted_image



Replies:

Posted By: kreg357
Date Posted: January 19, 2018 at 3:00 AM
Define "unplug the bypass module"? Are you removing all connectors or just the power / D2D cable?

Double check your wiring and connections to the IMO and IMI wires. Especially the cut IMI wire,
to be sure you don't have them reversed.

-------------
Soldering is fun!





Print Page | Close Window