Print Page | Close Window

Hornet 554t remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14409
Printed Date: July 09, 2025 at 8:00 PM


Topic: Hornet 554t remote start

Posted By: Mr_Kite
Subject: Hornet 554t remote start
Date Posted: June 03, 2003 at 3:29 PM

Started installing Hornet 554t alarm in my 1995 Nissan Sentra yesterday.  Everything went smoothly until I started to hook up the remote start harness.

The Pink wire says         (+) Output to ignition Circuit

The Pink/White wire says   (+) Output to second ignition Circuit

The wiring chart on this site says   Ignition   BLACK/ Red   Ign. Switch Harness

                                                              Ignition2  BLACK/ Green  Ign. switch harn.

The problem is i have no BLACK/ Red wire at the ignition switch harness!  I do however have a BLACK / YELLOW wire which isnt listed on the wiring diagram.

Anybody installed on this car before?   Should i just use the BLACK / YELLOW wire for ignition?   How can I test the Ignition wires with a multimeter to see what exctally they are?

Thanks!




Replies:

Posted By: Mr_Kite
Date Posted: June 03, 2003 at 3:34 PM

Oh and another question i have is which way do i hook up the shock sensor?

The wire's harness is the same on both sides yet the wiring is not.  One side the green wire loop into the blue wires hole.  The other harness the green wire hooks to nothing.  Which side plugs into the sensor and which side into the brain?


Print Page | Close Window