1995 Ford F-250, Avital 4103 Remote Start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144135
Printed Date: May 05, 2024 at 9:59 PM
Topic: 1995 Ford F-250, Avital 4103 Remote Start
Posted By: ecoboost6
Subject: 1995 Ford F-250, Avital 4103 Remote Start
Date Posted: February 07, 2018 at 7:23 PM
Trying to install remote start on 1995 f-250 auto trans. Its a avital 4103 4 button. looking at the wiring diagram and "quick reference" where do the activation input go and factory alarm and rearm do I just leave out? also what's the difference between accessory circuit and output to accessory circuit?
Replies:
Posted By: geepherder
Date Posted: February 07, 2018 at 7:53 PM
The activation input allows you to connect a momentary (push button) switch to activate the remote start from inside the vehicle (optional). It can be useful, for instance, if you're in the vehicle and don't want to kill the engine but need to run inside the house for a few minutes. One side goes to ground, the other to the activation wire.
The factory arm/disarm wires are not used for your truck.
-------------
My ex once told me I have a perfect face for radio.
|