Print Page | Close Window

Compustar Model ID?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144148
Printed Date: April 29, 2024 at 6:14 AM


Topic: Compustar Model ID?

Posted By: monty_77
Subject: Compustar Model ID?
Date Posted: February 12, 2018 at 8:10 AM

posted_imageposted_imageposted_image

I know it compustar was wondering on model, have not gotten it in yet, had customer send pics to help I’d so I could find manuals


Any help is appreciated

Thanks



Replies:

Posted By: kreg357
Date Posted: February 12, 2018 at 7:22 PM
The remotes are probably 1W900FMR's. Decent remotes with 3,000 foot range.
They can be paired with almost any Compustar system, from the CM3000 to the latest models.
You really need to see the remote start controller box to know what you have.

-------------
Soldering is fun!




Posted By: monty_77
Date Posted: February 12, 2018 at 7:33 PM
Ok Thank you , will just have to wait until customer gets it to me

doorlocks are working, but will not start, and the parklights are not hooked you for error codes

had him look for an on off switch under dash driver side, but not sure he had an idea what to do!




Posted By: kreg357
Date Posted: February 12, 2018 at 7:40 PM
It might just be in Valet Mode, especially if the Parking Lights are not responding to lock commands
and everything used to work. I would try exiting Valet Mode before getting serious. Here is the info :

Q: The vehicle will lock and unlock, but will not remote start or flash the parking lights.
A: The system is in Valet Mode. Tap the Lock and Trunk Buttons at the same time for a half second to
    exit Valet Mode. If that does not work try reprogramming the remotes again.

-------------
Soldering is fun!




Posted By: monty_77
Date Posted: February 12, 2018 at 8:16 PM
ok thanks will try to reprogram remotes after i try and get it out of valet mode not confident in the customer is doing it right

Thanks for the help





Print Page | Close Window