5305 Viper 200ma Unlock Output. How to Wire It?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144185
Printed Date: May 12, 2025 at 8:22 PM
Topic: 5305 Viper 200ma Unlock Output. How to Wire It?
Posted By: whyisthissohard
Subject: 5305 Viper 200ma Unlock Output. How to Wire It?
Date Posted: February 27, 2018 at 10:13 PM
I have a sprinter and I finally figured out how to wire the door lock master lock. Now I would like to wire the secondary lock but do not know how to get a 200ma out put to trigger a relay. At least it doesn’t work the same as a 500ma. I know this has to be an easy answer. I did try looking, thanks for any help
BTW this is how I need to wire it...
87 and 85 (12v constant)
87a (ground)
30 (switch)
86 (alarm output) which is 200ma and I’m not sure how to trigger a relay with it. At least it won’t work for the relay I have?
Replies:
Posted By: whyisthissohard
Date Posted: February 28, 2018 at 12:35 AM
Just ignore this I had the wiring right. I just accidentally switched the switch wires (sensor and motor)... I think it blew/fried something cause I now longer get any signals from my sensor wire. I fed the sensors 12 volts... so that means what is broken? CTM? or Sensors? hopefully sensors cause thats easier to fix..
|