2280 Xr Pro Ultrastart
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144197
Printed Date: July 02, 2025 at 8:29 PM
Topic: 2280 Xr Pro Ultrastart
Posted By: jpadj22
Subject: 2280 Xr Pro Ultrastart
Date Posted: March 04, 2018 at 9:20 AM
Hi im installing a 2280 xr ultrastart with an idatalink bypass. I have one question i have two 4 pin connectors. Not sure which . Anyone know? Thanks.
-------------
No better feeling then getting a remote start to work right!
Replies:
Posted By: kreg357
Date Posted: March 04, 2018 at 11:30 AM
Here is a link to the 80 Series Install Guide :
https://www.ultrastarters.com/manuals/MAN-80s-INSTALL-2011.7.22.pdf
On the Page 4 diagram, it looks like you would use port marked
"BYPASS MODULE DATA COMMUNICATION PORT" at the bottom. Not sure if
it is 2-Way capable. Might be one-way only where the 2280 can send
commands like Lock and Unlock but does not receive inputs like Brake,
Tach, Door Status, etc. I never tried anything 2-way with them.
-------------
Soldering is fun!
Posted By: jpadj22
Date Posted: March 05, 2018 at 9:42 AM
Thanks Kreg, I hardwired it anyway I was Just Curious to see if the 2 or 1 way communication would work. Ill just stick to hardwired.
-------------
No better feeling then getting a remote start to work right!
|