Trying to combine Clifford 3706x and Install gear
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144325
Printed Date: May 03, 2024 at 8:52 AM
Topic: Trying to combine Clifford 3706x and Install gear
Posted By: onlylive_once
Subject: Trying to combine Clifford 3706x and Install gear
Date Posted: April 17, 2018 at 1:21 PM
So my buddies Jeep has a clifford 3706x installed. Jeep has no power locks. Bought Amazon install gear universal power door lock kit with keyless entry and 3 2 wire and 1 5 wire actuator and I bought an extra 5 wire. He left off the part the jeep already had a security system.
So looks like the alarm has a 2 wire blue and green door lock harness. He doesn't have the harness though. So I still gotta figure out where to come up with that.
But the install gear kit has a brown and white from switch. Is this what I would hook to the blue and green of the alarm. Cause there is no actual door switch.
Or do I just tie the blue and green from clifford into the blue and green from the power door lock kit.
Anyone know where I can get that 2 pin harness?
|