2015 Jeep Renegade Remote Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144408
Printed Date: May 06, 2025 at 9:27 PM

Topic: 2015 Jeep Renegade Remote Start

Posted By: beerbill
Subject: 2015 Jeep Renegade Remote Start
Date Posted: April 28, 2018 at 5:26 PM

Using asd alca on 2015 jeep renegade with manual transmission. Anyone know which clutch wire to connect to ask alca? Thanks

Replies:

Posted By: kreg357
Date Posted: April 29, 2018 at 4:31 PM

Think I would give iDatalink a call. Their WEB site only lists the Renegade with Automatic Transmission
and that is why the install guide does not show a clutch connection. I'm trying to remember if that MT
vehicle is not possible to do because of the inability to get Reservation Mode ( and Idle Mode ) to work.

-------------
Soldering is fun!

Posted By: beerbill
Date Posted: April 29, 2018 at 4:54 PM

Thanks. I'm really pulling my hair out on this one. Have tried different firmware configurations and still no good.

Posted By: kreg357
Date Posted: April 29, 2018 at 5:12 PM

Fortin doesn't list it yet. Not sure how different it is from a Fiat 500X.
Howie II can tell you some Fiat stories.... posted_image

Here is the Clutch info :
Clutch Pedal BROWN/BLACK (+) @ CLUTCH PEDAL SWITCH 6 PIN CONN, PIN 4

-------------
Soldering is fun!

Posted By: beerbill
Date Posted: April 30, 2018 at 12:48 PM

Thanks a lot for wiring detail. Yes this vehicle uses the same platform as the Fiat 500x. Built in the same place. This will be the last one we will do until they catch up with the firmware. When you open the door the car shuts off -no take over available. Thanks for all the help.

Print Page | Close Window