installing of alpine sec-150r

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14443
Printed Date: July 07, 2025 at 1:50 PM

Topic: installing of alpine sec-150r

Posted By: zfhtang
Subject: installing of alpine sec-150r
Date Posted: June 04, 2003 at 9:52 AM

my friend just sent me a sec-150r. i'm in vietnam, and can not ask somebody's help to install it. my car is 1994 toyota 4runner. i do not have a lot experience on installing the alarm.

please tell me how to install the sec-150r. include how to find the relative relay and how to wire.

thanks a lot!

Fuhu Zeng

-------------
Zeng Fuhu

Replies:

Posted By: zfhtang
Date Posted: June 08, 2003 at 8:12 AM

i've install the alarm, but the remote control sec-rc001 does not response. i find the serial no of the main unit and the remote control is diffrent. the main unit is 20507733, two sec-rc001are 20507731. i dont know if this is right . or i have to recode the remote control for the main unit?

Please me some advise, and thanks a lot

-------------
Zeng Fuhu

Posted By: nighthawk2k
Date Posted: June 08, 2003 at 8:32 PM

Try Reprogramming the remote. It might have been a repair sent back in a different box. It happens sometime

-------------
Tommy

-Clifford/Directed/Alpine-Audio & Security-
New York Installer posted_image

Posted By: zfhtang
Date Posted: June 10, 2003 at 5:08 AM

Thanks Tommy. the problem is that i don't know how to reprogramming the remote. would you please tell me the step to operate the reprogram procedure? thanks a lot

-------------
Zeng Fuhu

Posted By: nighthawk2k
Date Posted: June 10, 2003 at 9:06 AM

Here you go. Follow the procedures.
posted_image

-------------
Tommy

-Clifford/Directed/Alpine-Audio & Security-
New York Installer posted_image

Posted By: nighthawk2k
Date Posted: June 10, 2003 at 9:11 AM

Sorry about that here.
posted_image

-------------
Tommy

-Clifford/Directed/Alpine-Audio & Security-
New York Installer posted_image

Posted By: zfhtang
Date Posted: June 14, 2003 at 8:03 PM

Thanks Tommy! Follow the steps as you show to me I have settle the prolem. now the remote control works good. Many thanks again.

Fuhu Zeng

-------------
Zeng Fuhu

Posted By: nighthawk2k
Date Posted: June 14, 2003 at 8:08 PM

your welcome. If you have any other questions feel free to ask.

-------------
Tommy

-Clifford/Directed/Alpine-Audio & Security-
New York Installer posted_image