Headlight Off Delay Not Working, Using New Viper
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144460
Printed Date: May 04, 2024 at 6:56 PM
Topic: Headlight Off Delay Not Working, Using New Viper
Posted By: tallcool.one
Subject: Headlight Off Delay Not Working, Using New Viper
Date Posted: May 19, 2018 at 4:11 PM
2009 ram 1500 megacab has had an autoPage rs1100 with the headlamp off delay (when security is disarmed the headlights come on and are turned off by a predetermined time set in the vehicle's evic) working for years until it the autoPage died.
Newly installed viper 5906v security w/remote start (sensors: shock, tilt, invisibeam) and have replaced the old omni db-all with dei db3. Everything on the viper uses d2d protocol.
Using the factory keyfob the headlight off delay works but not via the Viper remote.
There are no options for this in the alarm or db3 flashing for this (that I can find).
Any ideas on how to get the headlight off delay to work with the viper remotes so it respects the evic settings too?
|