Print Page | Close Window

Code Alarm CATX4 Won't Unlock Doors, 2011 Chevy Cruze

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144515
Printed Date: April 18, 2024 at 12:35 AM


Topic: Code Alarm CATX4 Won't Unlock Doors, 2011 Chevy Cruze

Posted By: dfgdsfgh
Subject: Code Alarm CATX4 Won't Unlock Doors, 2011 Chevy Cruze
Date Posted: June 09, 2018 at 1:21 PM

chevy cruze 2011

Hood and trunk are closed.

I have to spam the unlock for minutes (one time took 10 minutes) to get it to unlock.

It locks with one press of lock.

It starts my car up with the press of the startup button.

The three press to open trunk no longer works (same button as unlock)

I have replaced:

1. Battery in fob
2. Battery in car (have to replace it yearly anyway in arizona)
3. code alarm Sensor
4. door lock actuators (they had other issues, just mentioning cause they new)

I have an ebay fob being sent to me.

However, in the event that fails to unlock the car properly, what are some other suggestions you guys have that could be the cause?



Replies:

Posted By: joshuajoshua
Date Posted: August 13, 2018 at 9:58 PM
What was the solution?

I have the same problem with my Toyota Tundra...

Won’t unlock, just lock and start...

Had it a year, and it just started acting up this week.

I think it’s a fuse...

Josh




Posted By: silvercivicsir
Date Posted: August 23, 2018 at 3:14 PM
what bypass module did you use? might want to reset the bypass, and program it for dbl pulse unlock.




Posted By: silvercivicsir
Date Posted: August 23, 2018 at 3:15 PM
or could try adding disarm to the door pin wire to wake up the BCM.




Posted By: silvercivicsir
Date Posted: August 23, 2018 at 3:16 PM
oh as for the trunk, it's Press and HOLD unlock for 3 seconds.




Posted By: beegbie
Date Posted: August 24, 2018 at 8:58 PM
Does the led on the remote come on when pressing unlock?




Posted By: joshuajoshua
Date Posted: August 25, 2018 at 6:34 PM
No trunk, it’s a tundra.




Posted By: joshuajoshua
Date Posted: August 25, 2018 at 6:35 PM
LED does come on, I even tried my back up clicker.




Posted By: joshuajoshua
Date Posted: August 25, 2018 at 6:37 PM
Gotta get back in there and figure out which bypass mod was.

It all worked fine for a year, until two weeks ago.

The system clicks, but it does not unlock the doors.

Trying to find that 4th fuse...





Print Page | Close Window