Inwells 1386-3506 Alarm, How to Reset?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144677
Printed Date: May 04, 2024 at 11:19 AM

Topic: Inwells 1386-3506 Alarm, How to Reset?

Posted By: kruzin
Subject: Inwells 1386-3506 Alarm, How to Reset?
Date Posted: August 19, 2018 at 6:55 PM

Anyone ever have one of these and know how to reset the control box? It acts like there is a security issue after remote starting it runs for 30 seconds or so then shuts down during this relays are clicking in it I assume its for the parking lights (which aren't hooked up yet) I wanted to make sure it was operable before hooking up all the other features. The install is in a 2005 Colorado tried using a DB3 wouldn't bypass the passlock 2 system soft reset and relearned it numerous times with no change so I bypassed with a resistor and relays per DEI tech doc 1603 now it starts and shuts down? Any Ideas before I take a B.F.H. to it! posted_image

Replies:

Posted By: eguru
Date Posted: August 20, 2018 at 7:48 AM

How have you connected the door open sense input?

Posted By: kruzin
Date Posted: August 20, 2018 at 12:50 PM

Yes I hooked up the door input tried with and without it made no difference. The key fob indicates lights on but I'm not hooked into the lights yet but the vehicle has DRL so that could be the issue with the light warning I'll pull the relay on it see if it goes away.

Posted By: db208508
Date Posted: May 28, 2019 at 6:44 PM

I was wondering if you by chance had the schematics/install directions for this alarm still?
If so is there anyway I could get a copy? I've had this alarm for years and it didn't come with any.