2008 Honda Accord, Aftermarket Push Start System
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144696
Printed Date: April 19, 2024 at 5:31 PM
Topic: 2008 Honda Accord, Aftermarket Push Start System
Posted By: jdminspire
Subject: 2008 Honda Accord, Aftermarket Push Start System
Date Posted: August 29, 2018 at 1:45 PM
I'm installing a push start system in my car I have it working the car starts and everything the system has a feature where the car is locked the push start is disabled and when the car is unlocked push guard is enabled for this system to work right I have to connect the positive white lock wire and a positive white and black unlock wire to cars lock and unlock wire. These are the wires for my car but they're negative pulse how do I convert it into a positive
Lock ORANGE IN THE DRIVERS DOOR #201
Unlock BROWN *** IN THE DR DOOR W DOUBLE PULSE
#201- See Negative Pulse Door Lock Diagram. * GREEN PLUG ** OF FUSE BOX WHITE PLUG *** From Installer- Unlock Requires BROWN And WHITE To Be Diode Isolated And Double Pulse For Unlock. Wires Found At Door Motor DOOR
Replies:
Posted By: the12volt
Date Posted: August 29, 2018 at 1:53 PM
|
the12volt •