Print Page | Close Window

2008 Honda Accord, DEI 2102T

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144738
Printed Date: May 14, 2025 at 10:45 AM


Topic: 2008 Honda Accord, DEI 2102T

Posted By: jdminspire
Subject: 2008 Honda Accord, DEI 2102T
Date Posted: September 20, 2018 at 2:16 AM

I want to install a dei2102t pke on my Honda Accord I have to diode isolate the disarm and unlock wire just wondering if somebody could make it quick schematic for me on how to do it I can easily follow that hairs the wires for my car LOCK      Orange      At switch in driver door       -
UNLOCK      Brown      At switch in driver door - Double pulse to disarm and unlock. May require a pulse to WHITE wire at same time as BROWN, diode isolate.



Replies:

Posted By: kreg357
Date Posted: September 20, 2018 at 3:37 PM
POWER UNLOCK    TAN AND WHITE (-)TYPE B, (REQUIRES DOUBLE PULSE to UNLOCK)    @ MODULE INSIDE DRIVERS DOOR

Obtain two 1N4001 diodes. Any 1N400x will work.
Use the 2102T Blue wire at Pin 2.
Connect as follows :

posted_image

-------------
Soldering is fun!


Print Page | Close Window