How to Wire Keyless Entry to Existing Controller?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144740
Printed Date: May 20, 2024 at 4:49 PM

Topic: How to Wire Keyless Entry to Existing Controller?

Posted By: stuee1
Subject: How to Wire Keyless Entry to Existing Controller?
Date Posted: September 20, 2018 at 7:09 AM

Hi, i have a holden jackaroo where the keyless entry has stopped working, i removed the old controller which feeds to another controller.
On the other controller it has to wires which are both negative signal 1 open, 1 close.

I purchased a LB-402 control box but for some reason cant seem to get it working together.
Would someone be able to look and give me advise how to wire up, i dont want to have to wire up 2 replays for it if possible.

this is the unit and cable out

Thanks
Stu
link

Print Page | Close Window