Print Page | Close Window

Car Alarm FOB, Replacement or Substitute?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144787
Printed Date: May 29, 2024 at 2:02 AM


Topic: Car Alarm FOB, Replacement or Substitute?

Posted By: shelbysnake
Subject: Car Alarm FOB, Replacement or Substitute?
Date Posted: September 30, 2018 at 10:57 AM

I have a car alarm 2 button FOB that has been broken and need to find a replacement or a replacement case. The FOB shell is shattered but the FOB works just fine when I use it by pressing the buttons on the circuit board.


The FOB is for a 2000 Bentley Arnage Red Label.

Here are the markings on the outside and the inside of the FOB. Label the outside of the FOB case is: "Anti Code Grabbing 315Mhz". Label on the circuit board "BB2678F" and "46-352. Printed directly on circuit board "27-371" THe FOB uses a A23 12 volt battery.

Any help would be much appreciated.

THak you, Arthur





Print Page | Close Window