CM7200 Remote Start, 2013 Mazda CX-5

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144829
Printed Date: July 04, 2025 at 10:13 AM

Topic: CM7200 Remote Start, 2013 Mazda CX-5

Posted By: spudwink
Subject: CM7200 Remote Start, 2013 Mazda CX-5
Date Posted: October 03, 2018 at 6:49 PM

I have a CM7200 remote start module that I want to install in a 2013 Mazda CX-5, push-to-start, automatic.
1) Does any one know if this vehicle uses low current ignition wires.
2) If the Mazda CX-5 does use low current, can I use the high current harness instead without causing damage/problems, because I don't have a low current harness for my CM7200.

Replies:

Posted By: sand33p_sidhu
Date Posted: October 10, 2018 at 12:40 AM

You DO NOT need low current wires. Use main harness to connect your 12V, Ignition, Starter, Accessory wire.

Print Page | Close Window