2014 Toyota Camry Remote Start and Security with Compustar

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=144963
Printed Date: May 15, 2025 at 2:52 PM

Topic: 2014 Toyota Camry Remote Start and Security with Compustar

Posted By: tdi200
Subject: 2014 Toyota Camry Remote Start and Security with Compustar
Date Posted: November 20, 2018 at 8:17 PM

My car uses the standard G key, needing for a diagram and how hard it is to install i have already bought iDatalink / Compustar BLADE-AL Cartridge Bypass Module BLADEAL and Compustar FT-7000AS-CONT Universal Remote Start Keyless Entry Vehicle Security from Ebay seller name: "turacell"
seller claims he offer free flashing and programming as long as i leave him a message at check out about my car make and model
looking forward hearing from the legends on how to tackle this project

Replies:

Posted By: kylehondarider
Date Posted: November 23, 2018 at 11:34 PM

Pg 9 of the idatalink installation manual should help. You'll also need to wire in ignition, accessory, start, positive, negative, etc in addition to what's shown there. That info is vehicle specific and can be found here on the12volt or at www.bulldogsecurity.com

Posted By: tdi200
Date Posted: November 25, 2018 at 4:41 PM

The link u directed me to is not working, anyways i have ordered updated model Compustar - FT-DC3-LC and to make things easier the model takes the T-harness so everything is going to be plug and play part number iDatalink - T-Harness Model: ADS-THR-TL5

Print Page | Close Window