Print Page | Close Window

Remote Start Install, 2007 Jeep Wrangler

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145007
Printed Date: May 21, 2024 at 2:14 PM


Topic: Remote Start Install, 2007 Jeep Wrangler

Posted By: mastros101
Subject: Remote Start Install, 2007 Jeep Wrangler
Date Posted: December 04, 2018 at 11:00 AM

I have a Astrostart DS4 plus remote start system, with the T harness
Its going into a 2007 Jeep Wrangler.

Now I have the harness that goes into the immobilizer connected.

in the module I have the the 4 pin connected to the antenna,
H1 Main harness (12pin),H3 Data Harness (8pin) into the immobilizer.

I was wondering if I need to connect any of the connections from the 22pin analog input/output or the 10pin relay harness need to be connected ,
the vehicle already has an OEM remote for lock and unlock and the box does say its "OEM ready"

any help would be great thanks guys!!


Print Page | Close Window