Print Page | Close Window

Help w/ PLDATA

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14501
Printed Date: July 05, 2025 at 7:45 PM


Topic: Help w/ PLDATA

Posted By: sevenup_smile
Subject: Help w/ PLDATA
Date Posted: June 05, 2003 at 12:17 PM

Ok guys i have a crimestopper PLDATA which is a GM Passlock II bypass module. Question is the brown wire that says to connect to (-) ground when running wire to remote start system. What do i do here?

-------------
Be nice!



Replies:

Posted By: nighthawk2k
Date Posted: June 05, 2003 at 4:07 PM
you wanna connect that wire to the status output or third ignition output of the alarm.

-------------
Tommy

-Clifford/Directed/Alpine-Audio & Security-
New York Installerposted_image



Posted By: Velocity Motors
Date Posted: June 07, 2003 at 9:25 AM
Which Crimestopper model do you have ? There will be a GROUND OUT WHEN RUNNING wire that the PLDATA needs to see see when the remote starter engages. This will be a (-) only when remtoe started.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA


Print Page | Close Window