2007 Focus Trunk Release

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145043
Printed Date: May 13, 2025 at 8:27 PM

Topic: 2007 Focus Trunk Release

Posted By: mattb21
Subject: 2007 Focus Trunk Release
Date Posted: December 12, 2018 at 1:04 PM

So I was grabbing some vehicle wire information off of the website here for a 2007 Ford Focus and I came across the following:

https://www.the12volt.com/installbay/forum_posts.asp?tid=82837

TRUNK RELEASE BLACK / YELLOW (-), Requires Part #775 Relay @ TRUNK RELEASE SWITCH

Does anyone know if this requires a relay due to current restraints, or does it need to be isolated?

Replies:

Posted By: kreg357
Date Posted: December 12, 2018 at 3:06 PM

Doesn't really need a relay. That info came from Bulldog Security and their units only have a (+) Trunk Release output so a polarity change is required.

-------------
Soldering is fun!

Posted By: mattb21
Date Posted: December 12, 2018 at 3:08 PM

Awesome! Thanks for the heads up.

Print Page | Close Window