Compustar FT-DC3-S with GM10 Harness

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145095
Printed Date: April 18, 2024 at 9:56 PM

Topic: Compustar FT-DC3-S with GM10 Harness

Posted By: mrcllusb
Subject: Compustar FT-DC3-S with GM10 Harness
Date Posted: December 23, 2018 at 7:13 PM

Quick question. I want to install a Compustar alarm/remote start in my 07 Avalanche. Went to the Compustar site put my vehicle and I pulled up everything I need. The FT-DC3-S Start it brain, the ADS-THR-GM10 harness, PRO T12 remote and the Alarmit Kit. With this setup is there any hard connections that need to be soldered or is it completely plug and play?

-------------
"ole blake"

Replies:

Posted By: kaezoo
Date Posted: December 25, 2018 at 9:55 PM

The parking light connection will need to be wired, as well as the horn trigger if you want the horn chirp function.

Posted By: mrcllusb
Date Posted: December 29, 2018 at 7:27 PM

Thanks Kaezoo, I really appreciate it. Now time to find an authorized reseller to purchase.

-------------
"ole blake"

Print Page | Close Window