2018 Ford Transit, Viper Remote Start, DB3

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145098
Printed Date: May 10, 2025 at 12:14 AM

Topic: 2018 Ford Transit, Viper Remote Start, DB3

Posted By: skard250
Subject: 2018 Ford Transit, Viper Remote Start, DB3
Date Posted: December 25, 2018 at 2:36 PM

Help me my brothers. Im installing a viper remote start alarm and a db3. My issue is regaurding the p.a.t.s. my transit doesn't have one but the db3 can only be flashed for vehicles with it. When I attempt to program db3 to van with keys it won't verify that you used keys because theres no transponder no data wires to attach to. Since it doesn't sense any key it won't finalize programing. Help

-------------
mw

Replies:

Posted By: i am an idiot
Date Posted: December 25, 2018 at 3:43 PM

According to Audiovox, there is an immobilizer

Immobilizer Data Bus     YELLOW/ORANGE (TX) VIOLET/GRAY (RX)     PATS MODULE BLACK 4 PIN CONN, PIN 3 (TX) PIN 4 (RX)



IMMOBILIZER TYPE          TRANSPONDER
REMOTE START NOTES:     * Body Control Module (BCM) is part of the dash fuse box.

Print Page | Close Window