Viper 4105v, DB3 Doesn't Disarm Factory Alarm, 2004 Chevrolet Silverado
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145111
Printed Date: May 06, 2024 at 12:39 AM
Topic: Viper 4105v, DB3 Doesn't Disarm Factory Alarm, 2004 Chevrolet Silverado
Posted By: Trinity
Subject: Viper 4105v, DB3 Doesn't Disarm Factory Alarm, 2004 Chevrolet Silverado
Date Posted: December 28, 2018 at 11:23 AM
I need some help guys with my personal truck.
2004 Chevy Silverado 1500 single cab 2 door.
Viper 4105v with db3 wired D2D
The remote start works fine, The locks work fine. My problem I'm having is when I hit unlock both doors on my truck unlock, But If you open either door the factory alarm will sound. I have to hit the unlock button a second time to deactivate the factory alarm.
I have my db3 feature set to both doors and not priority, I have the viper set to 1 pulse unlock, Factory alarm disarm set to with unlock & Factory Alarm disarm pulses to single.
I have reset the viper twice & soft reset the db3 as well.
I just want to be able to hit unlock once on my remote and the truck unlock with factory alarm to disarm.
Can any one give me any guidance or help out?
Thanks Ryan
Replies:
Posted By: geepherder
Date Posted: December 28, 2018 at 12:13 PM
You could hardwire the factory alarm disarm output from the Viper to the truck. It's listed as (-) light green at the driver's door module.
-------------
My ex once told me I have a perfect face for radio.
Posted By: lurch228
Date Posted: January 06, 2019 at 4:45 AM
OEM Alarm Disarm Output (H2/4 wire)
1. With Unlock: the OEM Alarm Disarm wire will pulse as programmed at the same time as the unlock
(Blue) wire
2. Before Unlock: the OEM Alarm Disarm wire will pulse as programmed before the unlock wire
3. Remote start only: the OEM Alarm Disarm wire will pulse as programmed during remote start only
Try option 2 to fix you issue.
Posted By: Trinity
Date Posted: January 06, 2019 at 11:24 AM
I just hardwired the oem alarm disarm output and diode isolated it. Now the truck will unlock & disarm the oem alarm on the 1st push of the viper remote. However I have to hit it a second time for the lights on the truck to flash. Not sure why but I'm content with it. I know my passenger door latch switch isnt working so I can open the door and the alarm will not trigger (while armed), Interior lights will not power or the rap will not shut off. Not sure if that has something to do with it or not. But that's where I am.
Posted By: lurch228
Date Posted: January 28, 2019 at 1:48 AM
Standard fair for the OEM to lock the first time and then flash lights and horn honk on second lock press.
Posted By: Trinity
Date Posted: January 28, 2019 at 4:00 PM
I just removed the entire system. It was locking and arming the oem alarm fine.
|