Locks Not Working, 05 Toyota Tundra Double Cab Limited
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145158
Printed Date: April 29, 2024 at 12:22 AM
Topic: Locks Not Working, 05 Toyota Tundra Double Cab Limited
Posted By: djstraub
Subject: Locks Not Working, 05 Toyota Tundra Double Cab Limited
Date Posted: January 14, 2019 at 9:47 AM
Before anyone suggests its the actuators I already changed one out and it didn't fix it.
I attempted to install a remote start system. When I went to connect to the unlock/lock wires with 5 pin relays something went wrong. I smelt a burning smell. (I uninstalled the 5 pin relays)The doors will not unlock/lock with the factory key fob or from inside the vehicle with the driver or passenger lock/unlock buttons. I have check every fuse in the vehicle and there all good.
Based on my research It could be either the receiver door control or possibly a relay. Anyone else ever made this mistake ?
Any help would be great.
Thanks!
-------------
DJS
Replies:
Posted By: 2001eclipse
Date Posted: January 16, 2019 at 4:19 AM
So the truck came with power door locks already Im assuming, but I dont understand why you would still need relays for the door locks?
What remote start system did you install?
If the system you installed had a (-) output for lock/unlock wires, you could just wire them directly to the lock/unlock wires in the truck. I cant remember off the top of my head but it should be behind the kick panel... but I understand that your locks arent working anymore... Where and what wires did you connect the wires from your relays to?
|