Fixed: Compustar CM7000 Door Lock Issue
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145245
Printed Date: May 16, 2024 at 2:24 AM
Topic: Fixed: Compustar CM7000 Door Lock Issue
Posted By: trkymfns
Subject: Fixed: Compustar CM7000 Door Lock Issue
Date Posted: February 15, 2019 at 12:09 PM
UPDATE
This has been fixed! Apparently, the Blade connection for doorlock data changed from the Orange/White wire to the Green/Red wire. Hopefully, this will help someone else that comes across this issue so you don't spend days trying to figure it out.
--
Hello,
I have a 2011 Toyota 4Runner SR5 (G Key) with a Compustar CM7000 and ADS-Blade module. I recently had the firmware updated and now my door locks do not work with the Compustar remote unless the key is in the ON position. The factory remote works fine however, I do not get status updates to the 2 way remote (T11) when I lock the door with the factory remote. I am able to remote start with no issues. Has anyone come across an issue like this or know what might be causing it? I have checked all connections and settings to no avail.
|