Viper 5706V, 8 Flashes, 2000 Jeep Grand Cherokee
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145253
Printed Date: May 01, 2025 at 8:47 AM
Topic: Viper 5706V, 8 Flashes, 2000 Jeep Grand Cherokee
Posted By: ircorona
Subject: Viper 5706V, 8 Flashes, 2000 Jeep Grand Cherokee
Date Posted: February 19, 2019 at 7:48 AM
Hello Everyone
I am really hoping someone can help me Ive been on this for months.
2000 Jeep grand Cherokee, Alarm works getting 8 flashes for remote start
Hood pin is grounded- i did not change the programming to NC/NO- i am not sure which it is suppose to be
Nss/parking wire is grounded - No inline switch
What am I missing.
Replies:
Posted By: kreg357
Date Posted: February 19, 2019 at 9:03 AM
With Default programming, Hood Pin input is set to N.O. Normally open while hood is closed, ground when hood is raised.
Hood pin should go to (-) or ground only when hood is open which prevents a remote start up or shutdown a remote started engine.
Remove the ground from the hood pin wire and see what happens. Better yet, install the hood pin. It's a nice safety feature.
-------------
Soldering is fun!
Posted By: kreg357
Date Posted: February 19, 2019 at 9:08 AM
Did you change the Viper programming to Auto Trans?
-------------
Soldering is fun!
|