Print Page | Close Window

FLRSBA Remote Start Issue with 2008 Honda Accord

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145272
Printed Date: May 02, 2025 at 4:58 PM


Topic: FLRSBA Remote Start Issue with 2008 Honda Accord

Posted By: dee99ta
Subject: FLRSBA Remote Start Issue with 2008 Honda Accord
Date Posted: March 03, 2019 at 9:06 PM

Trying to install a FLRSBA remote start in a 2008 accord(4 cyl sedan). I sent the first one back as the it would allow the car to start, but would die right after. It didn't appear to be bypassing the immobilizer as I could see the security LED in the dash flashing. I did the learn procedure numerous times and even reflashed the module. I got the second one in along with a new T-harness, same thing. I have installed numerous flashlogic modules but never had an issue like this. Anyone see anything like this or have some suggestions? I seen in their firmware history some notes about trying to improve programming when using the T-harness.


Print Page | Close Window