Print Page | Close Window

Toad RK30 Keyless Entry Module

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145278
Printed Date: May 04, 2024 at 9:46 PM


Topic: Toad RK30 Keyless Entry Module

Posted By: shaunie61
Subject: Toad RK30 Keyless Entry Module
Date Posted: March 08, 2019 at 2:54 PM

I wish to add a Toad RK30 to my truck which has factory fitted motors in the sliding doors and tailgate. The system is operated from inside the vehicle by a reverse polarity switch (no relays).From the outside the doors can only be unlocked individually by key(hence the desire for keyless entry)

My question is this:As the Toad RK30 installation instructions are sketchy at best,I have no idea whether i need to fit relays between the module and the motors. The output from the module seems fairly weak.(The motors work but dont sound very convincing)

If i fit the relays,can I damage anything in the module?

I hope someone can guide me...

-------------
Shaun



Replies:

Posted By: the12volt
Date Posted: March 11, 2019 at 1:26 PM
Topic closed. See https://www.the12volt.com/installbay/forum_posts.asp?tid=145285

-------------
posted_image the12volt • Support the12volt.com


Print Page | Close Window