Factory Keyless Lock Times 2
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145401
Printed Date: May 28, 2024 at 11:22 PM
Topic: Factory Keyless Lock Times 2
Posted By: neo_1975
Subject: Factory Keyless Lock Times 2
Date Posted: May 06, 2019 at 11:18 PM
Trying to take the factory neg door lock trigger to activate a remote start. Im thinking the neg trigger would activate a relay.. then the next lock signal would pass thru to the starter to activate remote start ... but how?
Replies:
Posted By: geepherder
Date Posted: May 07, 2019 at 1:14 AM
I think you can use a PAC TR7. It may be better to use the actuator wires as a trigger.
-------------
My ex once told me I have a perfect face for radio.
Posted By: mgoetz74
Date Posted: May 08, 2019 at 1:58 PM
the RS has to have a activation input (white/blue on vipers) wire that gets hooked to the door lock wire and you can go in to the RS menu and change it from 1 2 or 3 pulses. I use to do it all the time on vipers when customer didn't want a extra remote
-------------
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!
Posted By: neo_1975
Date Posted: May 08, 2019 at 10:37 PM
I used to do this too... however the rs in question only has a single pulse to start. Was thinking of a channel expander to do this but thought a few relays would get the job done. May go with the Pac solution.
Thanks for your thoughts!
|