2006 Chevrolet Trailblazer, Viper 4706V, Flashlogic FLCAN
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145444
Printed Date: May 13, 2025 at 12:30 PM
Topic: 2006 Chevrolet Trailblazer, Viper 4706V, Flashlogic FLCAN
Posted By: spadz93
Subject: 2006 Chevrolet Trailblazer, Viper 4706V, Flashlogic FLCAN
Date Posted: June 05, 2019 at 6:44 AM
Been having a bit of an "issue" as of late.
On occasion, my remote will beep twice after sending a command to the car. Each command is successfully sent to the car, and the car also successfully sends confirmation back to the remote. The top LED on the remote will blink red slowly a few moments after the command is sent, and the remote will make a "dee doo" beeping sound (sorry, best I can put it into words lol). Additionally, I noticed that the blue LED on the antenna/control center begins blinking as soon as I turn the car off, even without arming the alarm. It will stop blinking if I hit unlock, and it will resume when I hit lock, but it has been blinking blue as soon as I turn the key to "off".
Anyone have any ideas? If I didn't clarify something very well, please let me know and I'll try to do so better.
Replies:
Posted By: geepherder
Date Posted: June 05, 2019 at 7:37 AM
I don't have that model, but when mine does that, it's letting me know the battery charge is getting low. Try charging your remote and see if that fixes it.
-------------
My ex once told me I have a perfect face for radio.
|