Want to Wire Lock Actuator to Work with a Door Pin Switch

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145461
Printed Date: May 12, 2025 at 8:33 PM

Topic: Want to Wire Lock Actuator to Work with a Door Pin Switch

Posted By: leeangie96
Subject: Want to Wire Lock Actuator to Work with a Door Pin Switch
Date Posted: June 12, 2019 at 6:50 AM

Hi,

I am looking for some guidance here.

I am using the Autoloc suicide door safety pins on my build, and have them wired to engage when I put the car in drive.

I would like to use a door pin switch to act as a safety feature, where the actuator would only engage when the door is closed.

Thanks in advance for your assistance.

Lee

Replies:

Posted By: geepherder
Date Posted: June 12, 2019 at 4:23 PM

Can you be more specific? Are you connecting to a factory door trigger? If so, what is the vehicle? Have you tested polarity and switch type (NO,NC)?

-------------
My ex once told me I have a perfect face for radio.

Print Page | Close Window