Print Page | Close Window

2002 dodge intrepid

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14548
Printed Date: June 13, 2024 at 8:47 PM


Topic: 2002 dodge intrepid

Posted By: amador
Subject: 2002 dodge intrepid
Date Posted: June 06, 2003 at 4:42 PM

good afternoon everyone i need some help once again im working on a 2002 dodge intrepid i need a wire diagram for a alarm install if anyone can help please do thanks



Replies:

Posted By: draasch
Date Posted: June 06, 2003 at 8:47 PM
Make:   Dodge
Model: Intrepid
Year:    2002
This Database Was Last Updated On:    10/7/02
Index #: 2932


Alarm
Constant 12 volts RED & PINK/BLACK IGNITION SWITCH HARNESS
Ignition 12 volts D BLUE/WHITE IGNITION SWITCH HARNESS
Starter YELLOW IGNITION SWITCH HARNESS
Dome Light YELLOW (-) AT EITHER KICK PANEL OR BCM *
Trunk Pin Switch TAN/BLACK (-) 22 PIN CONNECTOR HIGH IN DRIVER KICK
Parking Lamp BLACK / YELLOW (+) AT BODY CONTROL MODULE *
Power Lock WHITE/ D GREEN 16 PIN CONN. IN ACCESS HOLE #217**
Power Unlock SINGEL WIRE SYSTEM IN DRIVER KICK OR HIGH IN DR. KICK

* Body Control Module (BCM) Located Behind Fuse Box. #217- See Single Wire Resistor Door Lock System Diagram. **Door Locks Require +12v Pulse Thru 2.7K Ohm Resistor For Lock And +12V Pulse Thru 620 Ohm Resistor For Unlock.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt





Print Page | Close Window